Witter ZX304EU Clamp-On Towball Mounted 4 Bike Cycle Carrier
Commercio - Accedi per visualizzare i prezzi e acquistare
Fabbricante | Witter |
Codice articolo | ZX304EU |
Sistema portabici | Portabici montati su gancio di traino |
Numero di bici | 4 bici |
Carico massimo [in kg] | 60 |
Diametro larghezza pneumatici bici [in mm] | 60 |
Estendibile a 4ª bici? | No |
Luci | Standard |
Max. interasse [in mm] | 1300 |
Approvazione TUEV / DEKRA | No |
Tempo montaggio fino a [min] | 15 |
Adatto solo per ganci di traino flangiati? | No |
Distanza tra le rotaie [in mm] | 160 |
Pinze staccabili? | No |
Titolo prodotto | Witter ZX304EU Clamp-On Towball Mounted 4 Bike Cycle Carrier |
Pieghevole per la conservazione? | No |
Sporgenza dal veicolo [in mm] | 850 |
Garanzia | 3 anni |
Completamente assemblato | No |
Dispositivo antifurto | Sì |
Tempo montaggio da (min) | 0 |
Diametro telai bici [in mm] | 60 |
Max. peso per ogni bici [in kg] | 17 |
Bracci di supporto staccabili | Sì |
Estendibile a 3ª bici? | No |
Peso [kg] | 20.2 |
The ZX304 bike carrier from Witter is platform based and takes up to four cycles of any size including a child’s.
The carrier clamps directly to the towball using a lockable clamp-down lever making it suitable for any type of towbar.
- Wheel handles on cycle support arms can be upgraded to lockable handles to secure cycles to the carrier
- Carrier can be locked to the towball
- Simple tilt action allows access to the vehicle boot with bikes loaded
- Adjustable wheel holders accommodate most cycle sizes
- The carrier comes with three support arms attached to the back hoop and one bike-to-bike support arm for bike 3 and 4 to hold the cycles into position.
- Supplied with light board and NEW 2in1 electric plug to accommodate both 7pin and 13pin sockets—no adaptor needed
Carrier requires an initial assembly taking approx. 40 minutes (instructions are included in the box)
The carrier clamps directly to the towball using a lockable clamp-down lever making it suitable for any type of towbar.
- Wheel handles on cycle support arms can be upgraded to lockable handles to secure cycles to the carrier
- Carrier can be locked to the towball
- Simple tilt action allows access to the vehicle boot with bikes loaded
- Adjustable wheel holders accommodate most cycle sizes
- The carrier comes with three support arms attached to the back hoop and one bike-to-bike support arm for bike 3 and 4 to hold the cycles into position.
- Supplied with light board and NEW 2in1 electric plug to accommodate both 7pin and 13pin sockets—no adaptor needed
Carrier requires an initial assembly taking approx. 40 minutes (instructions are included in the box)