Witter ZX303EU Fahrradträger mit Spannhebelmechanismus
Handeln - Melden Sie sich an, um die Preise anzuzeigen und zu kaufen
| Hersteller | Witter |
| Artikelnummer | ZX303EU |
| Fahrradträgersystem | Anhängekupplungs-Fahrradträger |
| Anzahl Fahrräder | 3 Fahrräder |
| Max. Zuladung [in kg] | 51 |
| Durchmesser Fahrradreifen [in mm] | 60 |
| Abstand zwischen den Schienen [in mm] | 160 |
| TÜV / DEKRA Zertifikat | Nein |
| Max. Radstand [in mm] | 1300 |
| Produkttitel | Witter ZX303EU Fahrradträger mit Spannhebelmechanismus |
| Erweiterbar auf ein 3. Rad? | Nein |
| Beleuchtung | Konventionell |
| Max. Gewicht pro Fahrrad [in kg] | 17 |
| Durchmesser Fahrradrahmen [in mm] | 60 |
| Abklappmechanismus | Ja |
| Erweiterbar auf ein 4. Rad? | Nein |
| Diebstahlsicherung | Ja |
| Überhang vom Fahrzeug [in mm] | 600 |
| Abnehmbare Greifer? | Nein |
| Vormontiert | Nein |
| Montagezeit von [min] | 0 |
| Nur für Flange-Kupplungen geeignet? | Nein |
| Montagezeit bis [min] | 15 |
| Garantie | 3 Jahre |
| Zusammenfaltbar? | Nein |
| Gewicht [kg] | 17.4 |
The ZX303EU bike carrier from Witter is platform based and takes up to three cycles of any size including a child’s.
The carrier clamps directly to the towball using a lockable clamp-down lever making it suitable for any type of towbar.
- Wheel handles on cycle support arms can be upgraded to lockable handles to secure cycles to the carrier
- Carrier can be locked to the towball
- Simple tilt action allows access to the vehicle boot with bikes loaded
- Adjustable wheel holders accommodate most cycle sizes
- The carrier comes with three support arms attached to the back hoop to hold the cycles into position
- Supplied with light board and NEW 2in1 electric plug to accommodate both 7pin and 13pin sockets—no adaptor needed
Carrier requires an initial assembly taking approx. 35 minutes (instructions are included in the box)
The carrier clamps directly to the towball using a lockable clamp-down lever making it suitable for any type of towbar.
- Wheel handles on cycle support arms can be upgraded to lockable handles to secure cycles to the carrier
- Carrier can be locked to the towball
- Simple tilt action allows access to the vehicle boot with bikes loaded
- Adjustable wheel holders accommodate most cycle sizes
- The carrier comes with three support arms attached to the back hoop to hold the cycles into position
- Supplied with light board and NEW 2in1 electric plug to accommodate both 7pin and 13pin sockets—no adaptor needed
Carrier requires an initial assembly taking approx. 35 minutes (instructions are included in the box)
Fahrzeugkompatibilität
Produkt-PDFs
Montageanleitungen für Witter ZX303EU Fahrradträger mit Spannhebelmechanismus Download